TY - JOUR
T1 - Synthesis of Fine Cubic Li7La3Zr2O12 Powders in Molten LiCl-KCl Eutectic and Facile Densification by Reversal of Li+/H+ Exchange
AU - Weller, J. Mark
AU - Whetten, Justin A.
AU - Chan, Candace
N1 - Funding Information:
This work was supported by the NSF CAREER award DMR 1553519. J.M.W. acknowledges support from an ASU Fulton Schools of Engineering Dean’s Fellowship, and J.A.W. thanks the Fulton Undergraduate Research Initiative at ASU for funding. The authors thank C. L. Tsai and M. Finsterbusch from Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, Materials Synthesis and Processing (IEK-1), for helpful discussions. The authors gratefully acknowledge the use of facilities within the LeRoy Eyring Center for Solid State Science at Arizona State University.
PY - 2018/2/26
Y1 - 2018/2/26
N2 - Recently, solid-state electrolytes have been a highly active area of research for future Li-ion batteries due to the potential for drastically improved energy density and safety. Among these materials, garnet structured lithium lanthanum zirconate (Li7La3Zr2O12, LLZO) shows particular promise owing to the high ionic conductivity of its cubic polymorph, inertness, and electrochemical stability against metallic lithium. Herein we report the facile preparation of phase-pure, cubic LLZO via molten salt synthesis in a eutectic mixture of LiCl-KCl at 900 °C. Fine powders of Al- and Ga-doped LLZO were obtained with primary particle sizes ranging from 0.3 to 3 μm. Depending on the consolidation conditions, pellets with up to 86% relative density could be obtained, with Li+ conductivity values ranging from 0.230 to 0.371 mS cm-1. It is also observed that while the effect of hydration has a profoundly deleterious effect on sintering and densification, this effect can be mitigated by the simple addition of LiOH before sintering to reverse hydration and aid densification. Qualitative discussions on the mechanisms of LLZO formation in the molten salt medium are discussed, in addition to implications for scalable processing of LLZO electrolytes.
AB - Recently, solid-state electrolytes have been a highly active area of research for future Li-ion batteries due to the potential for drastically improved energy density and safety. Among these materials, garnet structured lithium lanthanum zirconate (Li7La3Zr2O12, LLZO) shows particular promise owing to the high ionic conductivity of its cubic polymorph, inertness, and electrochemical stability against metallic lithium. Herein we report the facile preparation of phase-pure, cubic LLZO via molten salt synthesis in a eutectic mixture of LiCl-KCl at 900 °C. Fine powders of Al- and Ga-doped LLZO were obtained with primary particle sizes ranging from 0.3 to 3 μm. Depending on the consolidation conditions, pellets with up to 86% relative density could be obtained, with Li+ conductivity values ranging from 0.230 to 0.371 mS cm-1. It is also observed that while the effect of hydration has a profoundly deleterious effect on sintering and densification, this effect can be mitigated by the simple addition of LiOH before sintering to reverse hydration and aid densification. Qualitative discussions on the mechanisms of LLZO formation in the molten salt medium are discussed, in addition to implications for scalable processing of LLZO electrolytes.
KW - LiLaZrO sintering
KW - garnet
KW - lithium ion conductor
KW - molten salt synthesis
KW - solid electrolyte
UR - http://www.scopus.com/inward/record.url?scp=85059616754&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85059616754&partnerID=8YFLogxK
U2 - 10.1021/acsaem.7b00133
DO - 10.1021/acsaem.7b00133
M3 - Article
AN - SCOPUS:85059616754
SN - 2574-0962
VL - 1
SP - 552
EP - 560
JO - ACS Applied Energy Materials
JF - ACS Applied Energy Materials
IS - 2
ER -