Method of forming front metallization for solar cells

Stuart Bowden (Inventor)

Research output: Patent


Modern silicon solar cell manufacturing relies on screen printing as a metallization process to apply the front contact grid to solar cells. This process uses silver-containing paste that is applied on top of the silicon nitride anti-reflection coating. In order for the paste to solidify and make contact to the substrate, the cell goes through a sequence of thermal treatments. At first the paste dries out then it etches through the dielectric, and finally makes contact with silicon. The screen printing process has a number of drawbacks, limiting potential improvement of future solar cells. Most advanced screen printing techniques do not allow less than 80 m grid line width in mass production. Metallization this wide is not required for the collection of electrons, and it reduces cell performance by shading the cell. Another drawback is the mechanical pressure applied to the wafer during printing. New manufacturing techniques are allowing silicon wafers to become thinner. Using screen printing manufacturing processes to apply contact metallization causes damage to thin silicon wafers. Finally, because silver is expensive, manufacturers need cost effective alternative materials for front metallization. Researchers at Arizona State University have developed a fast and inexpensive method for applying contact grids to solar cells. The process is applied in one step, eliminating a series of thermal treatments. No pressure is placed on the silicon wafers, thus preventing cell damage and improving the yield of high quality cells. In production application the grid metallization can be applied at a width of 30 m, which reduces shading on the cell from the contacts. This process eliminates expensive materials such as silver. As the process is low temperature, the method can be used in applications that are sensitive to heating. With some modifications the process could be used in 3D printing manufacturing applications. Potential Applications Solar cell contact grids Flexible displays 3D printing Benefits and Advantages Lower Costs Contact grids can be applied using copper, which is less expensive than silver. More Power Conductive fingers are thinner and more conductive with less cell shading. Retrofit Reduces manufacturing steps and eliminates production equipment. Download Original PDF For more information about the inventor(s) and their research, please see Dr. Stuart Bowden's directory webpage
Original languageEnglish (US)
StatePublished - Jan 24 2012


Dive into the research topics of 'Method of forming front metallization for solar cells'. Together they form a unique fingerprint.

Cite this