Interaction analysis model for transmission static compensator with EMTP

B. M. Han; G. G. Karady; J. K. Park; S. I. Moon

doi:10.1109/61.714499

Interaction analysis model for transmission static compensator with EMTP

B. M. Han, G. G. Karady, J. K. Park, S. I. Moon

Electrical, Computer, and Energy Engineering, School of (IAFSE-ECEE)

Research output: Contribution to journal › Article › peer-review

36 Scopus citations

Abstract

This paper describes controller design for the static compensator with mathematical analyses, and simulation model development with the EMTP to analyze the dynamic interaction with the ac transmission system. The main circuit was modeled by a 12-pulse voltage source inverter with ideal gate turn-off switches, and the signal generation and control circuit was modeled using the TACS in the EMTP. The effects increasing transmission capacity, damping low-frequency oscillation, and improving transient stability were verified with the model developed, assuming that the static condenser is connected to the 154 kV line for a typical one-machine-infinite-bus transmission system.

Original language	English (US)
Pages (from-to)	1297-1302
Number of pages	6
Journal	IEEE Transactions on Power Delivery
Volume	13
Issue number	4
DOIs	https://doi.org/10.1109/61.714499
State	Published - 1998

Keywords

EMTP (electro-magnetic transients program)
FACTS (flexible ac transmission systems)
STATCOM (static compensator)
TACS (transients analysis of control system)

ASJC Scopus subject areas

Energy Engineering and Power Technology
Electrical and Electronic Engineering

Access to Document

10.1109/61.714499

Cite this

@article{184ee4f6bd8b485cb95c889365190050,

title = "Interaction analysis model for transmission static compensator with EMTP",

abstract = "This paper describes controller design for the static compensator with mathematical analyses, and simulation model development with the EMTP to analyze the dynamic interaction with the ac transmission system. The main circuit was modeled by a 12-pulse voltage source inverter with ideal gate turn-off switches, and the signal generation and control circuit was modeled using the TACS in the EMTP. The effects increasing transmission capacity, damping low-frequency oscillation, and improving transient stability were verified with the model developed, assuming that the static condenser is connected to the 154 kV line for a typical one-machine-infinite-bus transmission system.",

keywords = "EMTP (electro-magnetic transients program), FACTS (flexible ac transmission systems), STATCOM (static compensator), TACS (transients analysis of control system)",

author = "Han, {B. M.} and Karady, {G. G.} and Park, {J. K.} and Moon, {S. I.}",

note = "Funding Information: This work described in this paper was supported by the research fund from Electrical Engineering & Science Research Institute in Korea.",

year = "1998",

doi = "10.1109/61.714499",

language = "English (US)",

volume = "13",

pages = "1297--1302",

journal = "IEEE Transactions on Power Delivery",

issn = "0885-8977",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "4",

}

TY - JOUR

T1 - Interaction analysis model for transmission static compensator with EMTP

AU - Han, B. M.

AU - Karady, G. G.

AU - Park, J. K.

AU - Moon, S. I.

N1 - Funding Information: This work described in this paper was supported by the research fund from Electrical Engineering & Science Research Institute in Korea.

PY - 1998

Y1 - 1998

N2 - This paper describes controller design for the static compensator with mathematical analyses, and simulation model development with the EMTP to analyze the dynamic interaction with the ac transmission system. The main circuit was modeled by a 12-pulse voltage source inverter with ideal gate turn-off switches, and the signal generation and control circuit was modeled using the TACS in the EMTP. The effects increasing transmission capacity, damping low-frequency oscillation, and improving transient stability were verified with the model developed, assuming that the static condenser is connected to the 154 kV line for a typical one-machine-infinite-bus transmission system.

AB - This paper describes controller design for the static compensator with mathematical analyses, and simulation model development with the EMTP to analyze the dynamic interaction with the ac transmission system. The main circuit was modeled by a 12-pulse voltage source inverter with ideal gate turn-off switches, and the signal generation and control circuit was modeled using the TACS in the EMTP. The effects increasing transmission capacity, damping low-frequency oscillation, and improving transient stability were verified with the model developed, assuming that the static condenser is connected to the 154 kV line for a typical one-machine-infinite-bus transmission system.

KW - EMTP (electro-magnetic transients program)

KW - FACTS (flexible ac transmission systems)

KW - STATCOM (static compensator)

KW - TACS (transients analysis of control system)

UR - http://www.scopus.com/inward/record.url?scp=0032186853&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032186853&partnerID=8YFLogxK

U2 - 10.1109/61.714499

DO - 10.1109/61.714499

M3 - Article

AN - SCOPUS:0032186853

SN - 0885-8977

VL - 13

SP - 1297

EP - 1302

JO - IEEE Transactions on Power Delivery

JF - IEEE Transactions on Power Delivery

IS - 4

ER -

Interaction analysis model for transmission static compensator with EMTP

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this