Improved fill-factor for the double-sided buried-contact bifacial silicon solar cell

S. B. Ghozati, A. U. Ebong, C. B. Honsberg, S. R. Wenham

Research output: Contribution to journalArticlepeer-review

10 Scopus citations


Despite the commercial success of buried-contact solar cells, the performance of early generations of these devices has been limited by an effective high rear-surface recombination velocity. For a number of years, the double-sided buried-contact bifacial (DSBCB) solar cells have demonstrated improved rear-surface passivation with corresponding improvements in current and voltage. In the past, however, the fill factors of these devices have been significantly degraded due to shunting of the rear floating junction. These limitations have been overcome through the use of much higher sheet resistivities for the rear n-type layer. Experimental devices based on this new approach have achieved fill factors approaching 82% while simultaneously achieving open-circuit voltages in the vicinity of 670 mV. Efficiencies in the range 17-18% without texturing, anti-reflection coatings, any form of light trapping, or even rear reflector have been achieved on float-zone material.

Original languageEnglish (US)
Pages (from-to)121-128
Number of pages8
JournalSolar Energy Materials and Solar Cells
Issue number2
StatePublished - Feb 24 1998
Externally publishedYes


  • Bifacial silicon solar cell
  • Fill-factor

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Renewable Energy, Sustainability and the Environment
  • Surfaces, Coatings and Films


Dive into the research topics of 'Improved fill-factor for the double-sided buried-contact bifacial silicon solar cell'. Together they form a unique fingerprint.

Cite this