Hybrid and conventional particle reinforced metal matrix composites by squeeze infiltration casting

R. Saha; E. Morris; Nikhilesh Chawla; S. M. Pickard

doi:10.1023/A:1017960912030

Hybrid and conventional particle reinforced metal matrix composites by squeeze infiltration casting

R. Saha, E. Morris, Nikhilesh Chawla, S. M. Pickard

Chemical Engineering

Research output: Contribution to journal › Article › peer-review

21 Scopus citations

Abstract

A report on hybrid and conventional particle reinforced metal matrix composites by squeeze infiltration casting was presented. Fabrication of the composites was done by squeeze casting and a perticulate preform was infiltrated at relatively high pressure with a liquid 6061 Al matrix. The results of microstructural analysis showed that the composite exhibits a relativly uniform distribution of particles, although due to the high volume fraction of reinforcement, the interparticle spacing was quite small.

Original language	English (US)
Pages (from-to)	337-339
Number of pages	3
Journal	Journal of Materials Science Letters
Volume	21
Issue number	4
DOIs	https://doi.org/10.1023/A:1017960912030
State	Published - Feb 15 2002

ASJC Scopus subject areas

Materials Science(all)

Access to Document

10.1023/A:1017960912030

Cite this

@article{ca572a99b2e24f7796cb7eccf26d9edf,

title = "Hybrid and conventional particle reinforced metal matrix composites by squeeze infiltration casting",

abstract = "A report on hybrid and conventional particle reinforced metal matrix composites by squeeze infiltration casting was presented. Fabrication of the composites was done by squeeze casting and a perticulate preform was infiltrated at relatively high pressure with a liquid 6061 Al matrix. The results of microstructural analysis showed that the composite exhibits a relativly uniform distribution of particles, although due to the high volume fraction of reinforcement, the interparticle spacing was quite small.",

author = "R. Saha and E. Morris and Nikhilesh Chawla and Pickard, {S. M.}",

note = "Funding Information: RS, EM, and NC acknowledge the support of the United States Automotive Materials Partnership (USAMP) through a grant from the Department of Energy (DOE).",

year = "2002",

month = feb,

day = "15",

doi = "10.1023/A:1017960912030",

language = "English (US)",

volume = "21",

pages = "337--339",

journal = "Journal of Materials Science Letters",

issn = "0261-8028",

publisher = "Chapman & Hall",

number = "4",

}

TY - JOUR

T1 - Hybrid and conventional particle reinforced metal matrix composites by squeeze infiltration casting

AU - Saha, R.

AU - Morris, E.

AU - Chawla, Nikhilesh

AU - Pickard, S. M.

N1 - Funding Information: RS, EM, and NC acknowledge the support of the United States Automotive Materials Partnership (USAMP) through a grant from the Department of Energy (DOE).

PY - 2002/2/15

Y1 - 2002/2/15

N2 - A report on hybrid and conventional particle reinforced metal matrix composites by squeeze infiltration casting was presented. Fabrication of the composites was done by squeeze casting and a perticulate preform was infiltrated at relatively high pressure with a liquid 6061 Al matrix. The results of microstructural analysis showed that the composite exhibits a relativly uniform distribution of particles, although due to the high volume fraction of reinforcement, the interparticle spacing was quite small.

AB - A report on hybrid and conventional particle reinforced metal matrix composites by squeeze infiltration casting was presented. Fabrication of the composites was done by squeeze casting and a perticulate preform was infiltrated at relatively high pressure with a liquid 6061 Al matrix. The results of microstructural analysis showed that the composite exhibits a relativly uniform distribution of particles, although due to the high volume fraction of reinforcement, the interparticle spacing was quite small.

UR - http://www.scopus.com/inward/record.url?scp=0037085092&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0037085092&partnerID=8YFLogxK

U2 - 10.1023/A:1017960912030

DO - 10.1023/A:1017960912030

M3 - Article

AN - SCOPUS:0037085092

SN - 0261-8028

VL - 21

SP - 337

EP - 339

JO - Journal of Materials Science Letters

JF - Journal of Materials Science Letters

IS - 4

ER -

Hybrid and conventional particle reinforced metal matrix composites by squeeze infiltration casting

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this