The effect of thin film formation at crack tips on fracture

Research output: Contribution to journalArticlepeer-review

29 Scopus citations


The embrittlement of a HSLA steel by gaseous chlorine has been studied. At chlorine pressures greater than 1.33 × 103 Pa, embrittlement is observed to occur via a predominantly intergranular fracture mode. At pressures below this value no effect of the chlorine gas is observed and the fracture proceeds via the ductile mode characteristic of fracture in air or vacuum. Angularly resolved XPS studies indicate the formation of a thin film of FeCl2 occurs above and below the threshold pressure. The film thickness was found to increase with pressure and exposure and at constant pressure obeys a 1/X = A - B ln t growth law. Calculations made indicate that elastically hard thin films covering a crack tip can severely restrict or prevent dislocation emission in a substrate which is normally unstable to dislocation emission. It is found that for μfilmsub > 2 and for film thicknesses greater than 2 monolayers brittle behavior is predicted under some conditions for normally ductile behaving substrates. In conjunction with concepts of crack tip shielding, the embrittlement phenomenon is rationalized.

Original languageEnglish (US)
Pages (from-to)973-982
Number of pages10
JournalActa Metallurgica
Issue number5
StatePublished - May 1982
Externally publishedYes

ASJC Scopus subject areas

  • General Engineering


Dive into the research topics of 'The effect of thin film formation at crack tips on fracture'. Together they form a unique fingerprint.

Cite this