Non-uniform field modeling of ferrite-loaded cavity-backed slot antennas

Victor G. Kononov, Constantine Balanis, Anastasis C. Polycarpou, Craig R. Birtcher

Research output: Contribution to journalArticlepeer-review

5 Scopus citations


This communication presents a method that accurately models the non-uniformities of the magnetic field present within the ferrite material that is subjected to an externally applied magnetic field. Two major factors that influence this field are the applied magnetic field and the demagnetizing factor. Most of the formulations reported prior to this work ignored the non-uniformity of the applied magnetic field by assuming that this field is constant and unidirectional everywhere in the cavity. In addition to this, the demagnetizing factor was also assumed to be either of the ballistic or diagonal form. The approach presented here removes both of these approximations by determining the nonuniform field distribution using the finite element method and considering the full tensorial form of the demagnetizing factor. Predictions based on the approach presented here are compared with measurements and previous data predicted based on the uniform applied magnetic field along with the ballistic form of the demagnetizing factor.

Original languageEnglish (US)
Article number5175497
Pages (from-to)3402-3405
Number of pages4
JournalIEEE Transactions on Antennas and Propagation
Issue number10 PART 2
StatePublished - 2009


  • Biasing field
  • Cavity-backed slot
  • Ferrite-loaded antenna
  • Non-uniform magnetic field

ASJC Scopus subject areas

  • Electrical and Electronic Engineering


Dive into the research topics of 'Non-uniform field modeling of ferrite-loaded cavity-backed slot antennas'. Together they form a unique fingerprint.

Cite this