Mechanical fatigue resistance of an implantable branched lead system for a distributed set of longitudinal intrafascicular electrodes

A. E. Pena, S. S. Kuntaegowdanahalli, James Abbas, J. Patrick, K. W. Horch, R. Jung

Research output: Contribution to journalArticlepeer-review

17 Scopus citations


Objective. A neural interface system has been developed that consists of an implantable stimulator/recorder can with a 15-electrode lead that trifurcates into three bundles of five individual wire longitudinal intrafascicular electrodes. This work evaluated the mechanical fatigue resistance of the branched lead and distributed electrode system under conditions designed to mimic anticipated strain profiles that would be observed after implantation in the human upper arm. Approach. Custom test setups and procedures were developed to apply linear or angular strain at four critical stress riser points on the lead and electrode system. Each test was performed to evaluate fatigue under a high repetition/low amplitude paradigm designed to test the effects of arm movement on the leads during activities such as walking, or under a low repetition/high amplitude paradigm designed to test the effects of more strenuous upper arm activities. The tests were performed on representative samples of the implantable lead system for human use. The specimens were fabricated using procedures equivalent to those that will be used during production of human-use implants. Electrical and visual inspections of all test specimens were performed before and after the testing procedures to assess lead integrity. Main results. Measurements obtained before and after applying repetitive strain indicated that all test specimens retained electrical continuity and that electrical impedance remained well below pre-specified thresholds for detection of breakage. Visual inspection under a microscope at 10× magnification did not reveal any signs of damage to the wires or silicone sheathing at the stress riser points. Significance. These results demonstrate that the branched lead of this implantable neural interface system has sufficient mechanical fatigue resistance to withstand strain profiles anticipated when the system is implanted in an arm. The novel test setups and paradigms may be useful in testing other lead systems.

Original languageEnglish (US)
Article number066014
JournalJournal of neural engineering
Issue number6
StatePublished - Nov 10 2017


  • amputee
  • electrode lead
  • implant
  • intrafascicular electrode
  • mechanical fatigue testing
  • neuroprosthesis
  • peripheral nerve interface

ASJC Scopus subject areas

  • Biomedical Engineering
  • Cellular and Molecular Neuroscience


Dive into the research topics of 'Mechanical fatigue resistance of an implantable branched lead system for a distributed set of longitudinal intrafascicular electrodes'. Together they form a unique fingerprint.

Cite this