Anodic oxidation of pitch-precursor carbon fibers in ammonium sulfate solutions: Batch screening treatment results

Todd R. King; Donald F. Adams; Daniel A. Buttry

doi:10.1016/0266-3538(92)90071-A

Anodic oxidation of pitch-precursor carbon fibers in ammonium sulfate solutions: Batch screening treatment results

Todd R. King
, Donald F. Adams
, Daniel A. Buttry

Research output: Contribution to journal › Article › peer-review

16 Scopus citations

Abstract

Batch anodic electrochemical treatments in solutions of ammonium sulfate have been evaluated as methods of improving the adhesion of high-modulus, pitch-precursor carbon fibers with an epoxy matrix. Such treatments in concentrated solutions at high current densities resulted in over two-fold improvements in the fiber/matrix interfacial shear strength. Subsequent characterization suggested that these increases could not be significantly attributed to increases in chemical interactions between the fiber and matrix material.

Original language	English (US)
Pages (from-to)	351-359
Number of pages	9
Journal	Composites Science and Technology
Volume	44
Issue number	4
DOIs	https://doi.org/10.1016/0266-3538(92)90071-A
State	Published - 1992
Externally published	Yes

Keywords

adhesion
ammonium sulfate
composites
electrochemical treatment
fiber-matrix interface
pitch-based carbon fibers

ASJC Scopus subject areas

Ceramics and Composites
General Engineering

Access to Document

10.1016/0266-3538(92)90071-A

Cite this

@article{98b4af93f5a84a8c9bdbed198493c834,

title = "Anodic oxidation of pitch-precursor carbon fibers in ammonium sulfate solutions: Batch screening treatment results",

abstract = "Batch anodic electrochemical treatments in solutions of ammonium sulfate have been evaluated as methods of improving the adhesion of high-modulus, pitch-precursor carbon fibers with an epoxy matrix. Such treatments in concentrated solutions at high current densities resulted in over two-fold improvements in the fiber/matrix interfacial shear strength. Subsequent characterization suggested that these increases could not be significantly attributed to increases in chemical interactions between the fiber and matrix material.",

keywords = "adhesion, ammonium sulfate, composites, electrochemical treatment, fiber-matrix interface, pitch-based carbon fibers",

author = "King, \{Todd R.\} and Adams, \{Donald F.\} and Buttry, \{Daniel A.\}",

note = "Funding Information: The authors would like to express their appreciation to the Tonen Corporation for its financial support of this research, and for supplying the Tonen HM fibers. We would also like to thank Shell Chemical Company for donating the EPON 828 epoxy resin. We also gratefully acknowledge the assistance of Dr Kevin J. Hook, who performed the ESCA in the laboratories of Prof. Lawrence J. Drzal, at Michigan State University. Copyright: Copyright 2014 Elsevier B.V., All rights reserved.",

year = "1992",

doi = "10.1016/0266-3538(92)90071-A",

language = "English (US)",

volume = "44",

pages = "351--359",

journal = "Composites Science and Technology",

issn = "0266-3538",

publisher = "Elsevier B.V.",

number = "4",

}

TY - JOUR

T1 - Anodic oxidation of pitch-precursor carbon fibers in ammonium sulfate solutions

T2 - Batch screening treatment results

AU - King, Todd R.

AU - Adams, Donald F.

AU - Buttry, Daniel A.

N1 - Funding Information: The authors would like to express their appreciation to the Tonen Corporation for its financial support of this research, and for supplying the Tonen HM fibers. We would also like to thank Shell Chemical Company for donating the EPON 828 epoxy resin. We also gratefully acknowledge the assistance of Dr Kevin J. Hook, who performed the ESCA in the laboratories of Prof. Lawrence J. Drzal, at Michigan State University. Copyright: Copyright 2014 Elsevier B.V., All rights reserved.

PY - 1992

Y1 - 1992

N2 - Batch anodic electrochemical treatments in solutions of ammonium sulfate have been evaluated as methods of improving the adhesion of high-modulus, pitch-precursor carbon fibers with an epoxy matrix. Such treatments in concentrated solutions at high current densities resulted in over two-fold improvements in the fiber/matrix interfacial shear strength. Subsequent characterization suggested that these increases could not be significantly attributed to increases in chemical interactions between the fiber and matrix material.

AB - Batch anodic electrochemical treatments in solutions of ammonium sulfate have been evaluated as methods of improving the adhesion of high-modulus, pitch-precursor carbon fibers with an epoxy matrix. Such treatments in concentrated solutions at high current densities resulted in over two-fold improvements in the fiber/matrix interfacial shear strength. Subsequent characterization suggested that these increases could not be significantly attributed to increases in chemical interactions between the fiber and matrix material.

KW - adhesion

KW - ammonium sulfate

KW - composites

KW - electrochemical treatment

KW - fiber-matrix interface

KW - pitch-based carbon fibers

UR - https://www.scopus.com/pages/publications/0026789663

UR - https://www.scopus.com/pages/publications/0026789663#tab=citedBy

U2 - 10.1016/0266-3538(92)90071-A

DO - 10.1016/0266-3538(92)90071-A

M3 - Article

AN - SCOPUS:0026789663

SN - 0266-3538

VL - 44

SP - 351

EP - 359

JO - Composites Science and Technology

JF - Composites Science and Technology

IS - 4

ER -

Anodic oxidation of pitch-precursor carbon fibers in ammonium sulfate solutions: Batch screening treatment results

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this