15 Scopus citations


Testing and calibration constitute a major part of the overall manufacturing cost of microelectromechanical system (MEMS) devices. A physical-stimulus-free built-in-self-test (BIST) integrated circuit (IC) design characterizing the sensitivity of capacitive MEMS accelerometers is presented. The BIST circuitry can extract the amplitude and phase response of the acceleration sensor's mechanics under electrical excitation within 0.55% of error with respect to its mechanical sensitivity under physical stimulus. Sensitivity characterization is performed using a low computational complexity multi-variate linear regression model. The BIST circuitry maximizes the use of existing analog and mixed signal readout signal chain and the host processor core, without the need for computationally expensive fast Fourier transform (FFT)-based approaches. The BIST IC is designed and fabricated using the 0.18-μ m CMOS technology. The sensor analog front-end and BIST circuitry is integrated with a three axis, low-g capacitive MEMS accelerometer in a single hermetically sealed package. The BIST circuitry occupies 0.3 mm2 with a total readout IC area of 1 mm2, and consumes 8.9 mW during self-test operation.

Original languageEnglish (US)
Article number7776760
Pages (from-to)695-708
Number of pages14
JournalIEEE Sensors Journal
Issue number3
StatePublished - Feb 1 2017


  • Built-in-self-test (BIST)
  • Sensitivity
  • calibration
  • capacitive accelerometer
  • electrical stimulus
  • microelectromechanical system (MEMS)

ASJC Scopus subject areas

  • Instrumentation
  • Electrical and Electronic Engineering


Dive into the research topics of 'An Electrical-Stimulus-Only BIST IC for Capacitive MEMS Accelerometer Sensitivity Characterization'. Together they form a unique fingerprint.

Cite this