A compact, low-power, and electromagnetically actuated microspeaker for hearing aids

Sang Soo Je, Junseok Chae

Research output: Contribution to journalArticlepeer-review

21 Scopus citations


In this letter, we present an electromagnetically actuated microspeaker with microelectromechanical systems (MEMS) technology to reduce form factor, cost, and power consumption in hearing aid applications. The microspeaker has multilayer copper coils, a NiFe soft magnet on a polyimide membrane, and a NdFeB permanent magnet on the perimeter. The coil impedance is measured at 1.5 Ω and shows a very flat response across the audio frequency range. The device operates at a very low power, the lowest in MEMS speakers, comparable to that of the macrosize counterparts. A single-turn microspeaker with a diameter of 2.5 mm consumes 11.6 and 0.13 mW to generate a sound pressure level of 129 and 106 dB at 1 kHz, respectively. The measurement uncertainty is less than 10%, and the reproducibility is within 36% among the tested devices.

Original languageEnglish (US)
Pages (from-to)856-858
Number of pages3
JournalIEEE Electron Device Letters
Issue number8
StatePublished - Aug 2008


  • Acoustic device
  • Acoustic device fabrication
  • Actuator
  • Hearing aids
  • Loudspeaker
  • Microactuators
  • Microelectromechanical systems (MEMS)
  • Micromachining
  • Microspeaker

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering


Dive into the research topics of 'A compact, low-power, and electromagnetically actuated microspeaker for hearing aids'. Together they form a unique fingerprint.

Cite this